Mounting The Mic Hanger - Uniden UH400SX Owner's Manual

UNIDEN Model UH400SX, UH400SX-RM, UH500SX, UH500SX-RM OM

Mounting the MIC Hanger

The Microphone Hanger comes in two parts. How and where you mount the MIC hanger will
determine which parts to use.
Conventional Mounting with Screws
Use the front part of the MIC Hanger only.
Locate a suitable mounting position and mark and drill two 3mm holes.
Fix the MIC Hanger into place with screws.
Conventional Mounting with Double Sided Tape (not supplied)
High quality Double-Sided tape can be found at good retail stores.
Secure the front and back pieces of the MIC Hanger using the supplied binding screws.
Locate a suitable mounting position.
Apply high quality Double-Sided tape onto the fl at area of the MIC Hanger back piece and then
press fi rmly to the mounting position.
uh400sx, uh500sx, uh400sx-RM, uhSec1:15 Sec1:15 uh400sx, uh500sx, uh400sx-RM, uhSec1:15 Sec1:15
15
1/2/08 1:31:25 PM 1/2/08 1:31:25 PM