Group Scan Mode - Uniden UH044SX Operating Manual

UNIDEN Model uh044sx UHF CB Radio
OPERATION
GROUP SCAN(GS) Mode
To change between OS and GS scan;
1. Press MENU four times.
ENTER
GS setting ON or OFF will flash.
2. Press or
selection.
MENU
3. Press and hold
ENTER
exit.
To initiate scanning,
1. When is pressed during
Group Scan Mode, SCN will blink
and Group Scan Scanning begins.
2. To deactivate GS scanning, press
1. If SCAN is deactivated while it is tuned to an active
channel, the uh044sx will stay on that active channel.
If none of the channels re- active, the uh044sx will
reinstate the Scan start channel.
2. If GS Scanning is initiated when there are no
channels programmed in GS memory, an error tone
will be heard and scanning will not start.
to change the
to save and
16
MENU
CALL
ENTER
TX
MEM
PWR
SCAN
DUAL
or .