Operation; Setting The Fm Squelch; Monitor - Uniden UH089 Owner's Manual

UNIDEN Model UH-089 FRS CB Radio

Operation

Setting the FM Squelch

Turn the Unit ON by rotating the
volume control clockwise. Turn the
outer ring of the control to adjust the
Squelch.
You must select a
channel which is not
in use before setting
NOTE
the SQUELCH control.
(see p.7)
Strong Signals
Medium Signals
Weak Signals
Noise
Think of the squelch control as a
gate. If you turn Squelch fully
clockwise it raises the 'Squelch
Gate' so high that no signals get
through.

Monitor

Press the MONI button on the microphone to open the squelch and receive all
weak signals. Press and hold the MONI button for 3 seconds to hold the squelch
open. Press MONI again momentarily to cancel.
FM
Rotary
Channel
Selector
SLCT
OS/GS
STORE DUAL
Strong Signals
Medium Signals
Weak Signals
Noise
If you turn Squelch fully
counterclockwise it lowers the
'Squelch Gate' to the extent that
all signals get through - weak,
medium and strong signals and
noise.
6
MEM INST
SCAN
INST SET
Strong Signals
Medium Signals
Weak Signals
Noise
To set the 'Squelch Gate' to the
desired level, turn the squelch knob
counterclockwise until you hear
noise. Then carefully turn the
Squelch knob clockwise until the
noise fades. Now only strong
signals get through.
VOL
SQ
S/RF VOL
DUP
CTCSS
MONI