Advertisement
Install Battery Box
NOTE: The battery in the battery box is for emergency flush when AC power failures. Under normal condition of
AC power supply, the normal feature of the toilet will not be affected whether batteries are inserted in the battery
box. The user can choose whether to insert the battery or not.
Pull out the connecting wire under the battery box.
Press the buckle and pull it down, and take out the battery box from the rear panel (as shown in figure).
Unscrew the screw with a cross screwdriver and remove the battery box cover
Eight AA batteries are loaded correctly according to the mark on the battery box.
Tighten the screw on the battery box cover.
Insert the battery box properly into the slot according to the mark on the battery box cover, and push the battery
box until it is clamped.
Kohler Co.
battery box
slot
battery box
buckle of
battery box
17
Screw
battery box
cover
1195109-T01-A
Advertisement
