Uniden POLARIS Owner's Manual page 60

POLARIS_UT888ZL_UT01888ZA_0
3-I-2. LINK CH
This feature allows you to change the channel between the POLARIS
and the WHAM if you encounter interference.
1. Press and hold H/L/MENU for
2 seconds.
2. Press the PUSH – SELECT knob at
SETUP
3. Press the PUSH – SELECT knob at
WHAM
4. Press the PUSH – SELECT knob at
LINK CH, the following screen
appears.
5. Rotate the PUSH – SELECT knob
clockwise to increase the number,
counterclockwise to decrease.
The number will be entered when the
PUSH – SELECT knob is pressed.
6. After the LINK CH is entered, a
confirmation screen appears.
Rotate the PUSH – SELECT knob,
and then press PUSH – SELECT.
Note: You can select the channel 01-20.
10/3/02 4:18 PM
, the SETUP menu appears.
, the WHAM menu appears.
Page 57
HI
MEM
TELEPHONE
DSC CALL
SYSTEM
SETUP
REV.CH.MEM
EXIT
U.I.C.
DIRECTORY
AUTO.CH.SW
POS.REPLY
CH TAG
WHAM
BASE ID
LINK CH
EXIT
LINK CH
05
LINK CH
05
YES
NO
57
CAN