Uniden POLARIS Owner's Manual page 43

POLARIS_UT888ZL_UT01888ZA_0
To set USER MMSI code
1. Press and hold H/L/MENU for
2 seconds.
2. Press the PUSH – SELECT knob at
SETUP
3. Rotate the PUSH – SELECT knob to
select
4. Press the PUSH – SELECT knob,
the following screen appears.
5. You can now enter the USER MMSI
code. Rotate the PUSH – SELECT
knob clockwise to increase the
number, counterclockwise to
decrease. The number will be
entered when the PUSH – SELECT
knob is pressed, and the blinking
digit moves to the right.
6. After the final digit is entered, the
confirmation screen appears.
Press the PUSH – SELECT knob.
Note: You can only program your
POLARIS twice with an MMSI
number. After that, send your
POLARIS to Uniden for factory
service.
10/3/02 4:18 PM
, the SETUP menu appears.
USER MMSI .
Page 40
HI
MEM
TELEPHONE
DSC CALL
SYSTEM
SETUP
REV.CH.MEM
EXIT
FIPS
USER MMSI
GROUP MMSI
U.I.C.
DIRECTORY
AUTO.CH.SW
USER MMSI
000000000
USER MMSI
685749638
USER MMSI
685749638
YES
NO
ERROR TOO
MANY ENTRIES
PRESS
MENU KEY
40
CAN