Standby - Uniden POLARIS Owner's Manual

POLARIS_UT888ZL_UT01888ZA_0
1-F. STANDBY
The DSC STANDBY function allows the POLARIS to answer DSC calls
with the UNATTENDED message and record the calls for response at
another time. When you set the POLARIS to DSC STANDBY mode,
voice traffic may still be active on any chosen channel.
1. Press and hold
2 seconds.
2. Press the PUSH – SELECT knob at
DSC CALL
appears.
3. Rotate the PUSH – SELECT knob to
select
4. Press the PUSH – SELECT knob,
and the STANDBY directory appears.
5. When an individual DSC call is
received, the radio will respond with
the UNATTENDED message when
an operator cannot answer the call.
The DSC call will be recorded into
the radio's Call Waiting directory.
Note: If you press a key on the radio or the PTT, this feature will be
canceled.
10/3/02 4:18 PM
H/L/MENU for
, the DSC CALL menu

STANDBY

.
Page 28
HI
TELEPHONE
DSC CALL
SYSTEM
SETUP
REV.CH.MEM
EXIT
GROUP
ALL SHIPS
POS.REQUEST
POS.SEND
STANDBY
CALL WAIT
HI
DSC STANDBY
UNATTENDED
INDIVIDUAL
06/20 11:00P
KENT NEWMAN
ROUTINE
DSC STANDBY
UNATTENDED
28
CAN
CAN