Fujitsu PRIMERGY TX600 S3 Service Supplement Manual page 14

Notes on safety
V
ATTENTION!
Install only system extensions that satisfy the requirements and rules
governing safety, electromagnetic compatibility, and
telecommunications terminal equipment.
If you install other extensions, you might damage the system or
violate these safety regulations.
Information on which system extensions are suitable can be obtained
from the customer service center or your sales outlet.
The components marked with a warning label (e.g. lightning symbol)
should only be opened, removed, or exchanged by authorized,
qualified personnel.
Exception: You may exchange hot-plug power supply units.
If you cause a defect on the device by installing or exchanging system
extensions, the warranty will be invalidated.
You should only set the resolutions and refresh rates specified in the
Operating Manual for your monitor.
Otherwise, you might damage the monitor. If you are in any doubt,
contact your sales outlet or customer service center.
Batteries
V
ATTENTION!
Incorrect replacement of batteries can lead to risk of explosion. The
batteries may only be replaced with identical batteries or with a type
recommended by the manufacturer (see the Technical Manual for the
system board in the section
When replacing the lithium battery on the system board, always follow
the instructions in the Technical Manual for the system board (see
section "Documentation overview" on page
Notes on handling CDs/DVDs and CD/DVD drives
V
ATTENTION!
To prevent loss of data, damage to the device, or injuries, you should
only use CDs/DVDs in good condition in the CD/DVD drive of your
server.
14
"Documentation overview" on page
Service Supplement TX600 S3
Important notes
5).
5).