Uniden TRU 8885 Series Owner's Manual page 19

Room/Baby Monitor
This feature allows you to monitor
sounds in another room. Place the base
or a handset in the room you wish to
monitor; it will function as a
microphone. A second handset can be
set to function as a remote speaker,
allowing you to monitor sounds in the
room.
Using Room/Baby Monitor
1) Enter the Room Monitor menu (see
"Entering the Menu" on page 16).
appears.
L i st e n t o;
2) Select the handset or base you want
to monitor by using volume up/
down.
3) Press the OK soft key.
appears, and you hear sounds in the room
M o ni t or i ng
where the handset or the base is installed.
4) To turn off the Room Monitor, press the END soft key,
or end.
If you want to prevent other handsets or the base from monitoring this handset,
press the MENU soft key. Select the Handset Setup menu, and then the Room
Monitor submenu. Select
w w w . u n i d e n . c o m
and press the OK soft key.
Of f
Monitor using
handset or
base unit
G E T T I N G S T A R T E D [ 1 8 ]