NOTE
Only the last number
dialed can be accessed after
talk has been pressed.
!
Only numbers dialed from
the Base Unit keypad will
be redialed from the Base
redial key.
Press
redial/p
REDIAL 3
95983577
3rd 'most recent number
dialed' is displayed.
4. Press
and the number will be dialed.
talk
Redial from talk mode
talk
1. Press
2. Press
- the last number dialed
redial/p
will be displayed and redialed.
Redial from the Base Unit
1. To call the last number dialed from the Base Unit, press
2. Press
- the last number dialed will be redialed.
redial/p
3. To hang up, press
speaker
TRAVELLING OUT OF RANGE
During a call, noise will increase if you move your handset too far from your base unit.
If the range limit of your base unit is exceeded, your call will terminate within 30 seconds.
KEY LOCK / UNLOCK
When the handset is in the ST/BY mode, press
and hold
, a beep confirms and
flash/reg
the screen displays
KEY LOCKED
During the 'Key Locked' condition, the
buttons will only operate on an incoming call.
To unlock the keys, press and hold
again.
CALL WAITING/FLASH
If the Call Waiting tone sounds during a call -
Press
Australia:
flash/reg
Press
New Zealand:
flash/reg
again
.
flash/reg
, then
to switch between callers.
2
to switch between callers.
TALK
LOUD
1
TALK
LOUD
1
95979035
.
speaker
KEY LOCKED
KEY UNLOCKED
9