Setting The Number Of Rings - Uniden 7100A Operating Manual

PREPARATION
To play back your outgoing OGM 1 message at any time,
press OGM 1 , appears, the DTAM beeps and the
outgoing message plays.
To play back your outgoing OGM 2 message at any time,
press , appears, the DTAM beeps and the
OGM 2
announcement only message plays.
22
PREPARATION

SETTING THE NUMBER OF RINGS

The ring select switch on the back of the DTAM controls how
long the DTAM waits before it answers a call. Slide the switch
to the desired position.
2 The DTAM answers after two rings.
4 The DTAM answers after four rings.
7 The DTAM answers after seven rings.
T.S. (Toll Saver) - If there are new messages, the DTAM
answers after two rings. Otherwise, the DTAM answers after
four rings. This helps you avoid unnecessary toll charges when
calling by long distance to check your messages. If you hear
more than two rings, you know you can hang up because the
DTAM has no new messages.
NOTE:
• When the memory is full the DTAM answers the call and
plays OGM2 (the announce only message).
23