Set Close Call Alert; Setting Of Pager Screen; Alert Tone Volume; Alert Light Adjustment - Uniden UBCT8 Owner's Manual

Set Close Call Alert

This option controls whether the scanner sounds an additional
alert tone when a Close Call signal is detected.
Press or to select the option, and then press E.

Setting of pager screen

This option sets whether the scanner screens common pager frequencies from hits during
Close Call searching.
1. Press or , to select the option, and then press E.
Pager Screen On : The scanner ignores hits on common pager frequencies.
Pager Screen OFF : The scanner does not screen for common pager frequencies.
Note: Pager screen affects the following frequency range.
148.0000 - 149.2500 MHz
2. To return to previous mode, press

Alert Tone Volume

! Push VOL to select Loud, Medium, or Soft.
The Alert Tone beeps and the alert light flashes to
confirm your choice.

Alert Light Adjustment

The Alert Light has three settings (Bright, Dimmer, Off).
! Push SQL to select Bright, Dimmer or Off.
The Alert Light flashes and the alert tone beeps.
If you select Off, "FLASH"
remind you the Alert Light is Off.
will be displayed to