Channel-Level Settings; Editing The Channel Name - Uniden UBCD396T Owner's Manual

Select the group
Delete Group
The scanner prompts you to confirm deletion. To con-
firm, press . To cancel, press E
Note: Deleted groups cannot be restored. You must
re-enter them.

Channel-Level Settings

These settings affect only the channel you are
programming.

Editing the Channel Name

Program System
Select the system
Edit Group
Select the group
Edit Channel
Select the channel
Edit Name
Follow these steps to enter/edit the channel name.
1. Rotate the scroll control to select the first letter.
2. Press and hold
control once to select the next letter.
3. Repeat Steps 1 and 2 until you have entered the
channel name. Then press
scroll control to accept the setting.
Hints:
• Each channel name can be up to 16 characters.
Abbreviate as necessary to fit.
• The channel name appears on the second line of
the display when the scanner stops on a channel.
• If you do not enter a channel name, the scanner
displays the frequency (for conventional systems)
Programming/Editing Optional Settings
.
down then rotate the scroll
E or press down on the
84