Trunk Tracking - Uniden UBCD396T Owner's Manual

Automatic Channel Step – Accepts frequencies on
any valid channel step, even if it does not fall within
the band plan's default step.
Frequency Step – Lets you select a frequency step
(5, 6.25, 7.5, 8.33, 10, 12.5,15, 20, 25, 50 or 100 kHz)
for manual mode and chain search mode. The
scanner's auto step feature lets you set the scanner
so it automatically chooses the correct step.
Quick Recall – Lets you quickly select a specific
channel by choosing the system, group, and channel.
Scan/Search Delay – You can set the scanner so it
remains on a frequency up to 5 seconds after the last
transmission to wait for a possible reply.
Text Tagging – You can name each system, group,
channel, talk group ID and custom search range,
using up to 16 characters per name.
Unique Data Skip – Allows your scanner to skip
unwanted data transmissions and reduces birdies.
Duplicate Frequency Alert – Alerts you if you try to
enter a duplicate name or frequency already stored in
a system.
Memory Backup – If power is lost or disconnected,
the scanner retains the frequencies you programmed
in its memory.

Trunk Tracking

Trunk Tracker IV ™ Operation – Follows
unencrypted conversations on analog Motorola,
Motorola Astro 25 (APCO 25), EDACS, EDACS SCAT,
and LTR trunked radio systems, including systems in
VHF, UHF, 800MHz Standard, 800MHz Splinter, and
900 MHz bands. The scanner can scan both
conventional and trunked systems at the same time.
Feature Highlights
10