Uniden SC180 Operating Manual page 10

B. Channel Number — Indicates the current
channel that the scanner is on.
C. Memory Bank Numbers — Each Memory Bank
consists of 10 channels that you can select or
deselect during scanning operation, using the
numeric keypad. When you select a Bank, its
number appears on the display. When you
deselect a Bank, its number disappears from the
display. When you press
scanning, only the Bank of the current channel
appears.
D. Bank Indicator — Appears with the Bank
Numbers (1~10).
E. Frequency Indicator — Indicates the frequency
being received by the scanner, or Alpha Name,
etc.
F. Low Battery Indicator — Appears on the
display when the Battery Pack is low and needs
recharging.
G. Mode/Function Indicators — (Only the active
mode(s)/function(s) are displayed during
operation.)
SCAN
SEARCH Indicates SEARCH Mode. Flashes
PRIORITY
HOLD
DELAY
L/O
WX
ATT
2. Press
channels that are not locked out. (SCAN moves
across the display during scanning.)
Indicates SCAN Mode.
when in TURBO SEARCH Mode.
Indicates PRIORITY SCAN is
activated.
Indicates SCAN HOLD or SEARCH
HOLD Mode.
Indicates DELAY is activated.
In SCAN Mode, indicates the
channel shown is "Locked Out".
In SEARCH Mode, indicates the
frequency shown is "Locked Out".
Indicates WEATHER SCAN Mode.
Appears when the Attenuator
function is set.
Indicates the keypad is locked.
Appears when the display mode is
Alpha Name mode.
to start scanning all programmed
7
to stop