Controls And Indicators; Top View; Front View - Uniden SC180 Operating Manual

Antenna
Connector
Earphone
Jack
SQUELCH
Control
ON-OFF/
VOLUME
Control
VFO Control
1. LCD DISPLAY — The liquid crystal display (LCD)
shows the current channel and frequency. It also
displays the mode, status, and bank indicators.
A. Priority Channel Indicator — P appears when
the scanner stops on a Priority Channel.

Controls and Indicators

Top View

Connect the rubber antenna to the BNC
connector and turn clockwise until it locks.
Plug the supplied earphone into this jack
for private listening. When the earphone is
connected, the internal speaker is
disconnected.
Note the warning on the Inside Front Cover
and on page 11.
Adjust this control to set the scan threshold
and to eliminate the background rushing
noise heard in the absence of an incoming
signal. See the Operation Overview
Section for adjustment procedures.
Use this control to turn the scanner on or
off, and to adjust the volume.
Use this control to select channels in
Manual mode, select the band for Band
Search, and select frequencies in
Band/Limit Search mode. You can also
use this to program Alpha Name
characters.

Front View

(Refer to the illustration on page iii)
6