Deleting A Stored Frequency; Editing A Stored Frequency; Duplicate Frequency Alert - Uniden BC250D Owner's Manual

Note: • To clear a mistake while entering the frequency,
press
display is cleared.
• If you enter a channel or
frequency which is out of the
scanner's range, a beep will
sound and ERROR appears
on the display.
• For each channel, you can also
change the step size or the
mode. (See page 103.)

Deleting a Stored Frequency

To delete a stored frequency:
a. Select a channel.
b. Press 0.
c. Then press E.
Note: Channels with no frequencies are
automatically locked out.

Editing a Stored Frequency

1. Press MENU/BACK.
2. Select 2:SCAN OPTION / 1:CONVENTIONAL by
rotating the VFO and pressing E.
3. Select the channel number you want to edit by rotating the
VFO and pressing E.
4. Select 1:FREQUENCY by rotating the VFO and pressing
E.
5. Edit the frequency by using
keypad and pressing E.

Duplicate Frequency Alert

If you enter a frequency which has been
stored in another channel, you will hear
a beep and the channel stored displays
WARNING.
Press (decimal key) to clear and start again.
.
––– OR –––
Press E again to store the frequency in both channels.
(decimal key) repeatedly until the
.
27
(decimal key) and the
.