Setting The Delay Mode For Trunking Mode - Uniden BC250D Owner's Manual

Reverse Key
For Motorola and EDACS system; to change your display
between the Scan List indicators and trunk bank display,
press REVERSE.
For LTR systems only, the talkgroup must be active in order
to change the Scan List and bank indicators. If the talkgroup
is not active, change the Scan List by using the Menu screen.

Setting the Delay Mode for Trunking Mode

The delay of 2 seconds is automatically set for each talkgroup
for ID Scan mode and ID Search mode. To set the delay
feature, enter into the Menu mode.
1. Press MENU/BACK.
2. Select 2:SCAN OPTION / 2:TRUNK by rotating the
VFO and pressing E.
3. Select the bank number by rotating the VFO and pressing
E.
4. Select 4:DELAY and pressing E.
5. Select 1:ON or 2:OFF by rotating the VFO and pressing
E.
Note: If you want to verify the Delay mode setting, press and
hold MENU/BACK for 2 seconds in Trunking mode.
59