Selecting A Channel; To Transmit And Receive - Uniden uh049sx-2 Owner's Manual

UNIDEN Model uh049sx UHF CB Radio
OPERATION

SELECTING A CHANNEL

Press
channel.

TO TRANSMIT AND RECEIVE

The uh049sx uses the 40 UHF-CB Channels.
For your reference a list of the available chan-
nels and corresponding frequencies is printed
on page 24. (Channels 22 and 23 are for
telemetry and telecommand applications.
Transmit is inhibited on these channels).
1.
2.
3.
Hold the radio with microphone approximately
5 cm in front of your mouth with the antenna at
approximately 45° angle away from your head.
Speak in a clear, normal conversational voice.
4.
uh049sx OM.indd Sec1:12 uh049sx OM.indd Sec1:12
or to select the desired
If you press and hold
or the channel
numbers will scroll
rapidly.
The maximum RF transmit
power of uh049sx is 1 Watt.
Before you transmit, listen
for activity on the selected
channel.
When the channel is clear,
press and hold the to
transmit.
TX appears on the LCD.
When you have finished speaking, release the
then TX disappears on the LCD. BUSY appears while receiving a signal.
button
and listen for a response
12
17/8/07 3:01:08 PM 17/8/07 3:01:08 PM