Manually.selecting.a.channel; Locking Out Channels - Uniden BC125AT Owner's Manual

ManuaLLY.seLecting.a.channeL

You can continuously monitor a single channel without
scanning. This is useful if you hear an emergency broadcast on a
channel or if you want to monitor a specific channel.
To manually select a channel, press Hold and enter the
1.
channel number.
Press Hold again.
2.

locking Out Channels

You can increase the scanning speed by locking out channels
that have a continuous transmission such as a weather channel.
While receiving a channel or while in Scan Hold mode, press
l/O once to temporarily lock out the channel. Temporary L/O
and TL/O briefly appear in the display. Turning the scanner off
clears the temporary lockout.
Press l/O twice quickly to permanently lock out the channel.
Locked Out and L/O briefly appear in the display. Turning the
scanner off will NOT clear the lockout.
If you lock out a channel in Scan mode, the scanner will resume
scanning from the next channel.
To Lock Out a Specific Channel
Press Hold.
1.
2. Enter the channel number you want to lock out and press
Hold again. (You can also press Hold and scroll to the
channel.)
Press l/O once to temporarily lockout or press l/O twice
3.
quickly to permanently lock out the channel.
47