Selecting Channel; To Transmit And Receive - Uniden uh036sx-4 Quad Pack Operating Manual

SELECTING CHANNEL

Press channel
desired channel.

TO TRANSMIT AND RECEIVE

The UH036SX uses the 40 UHF-CB Channels. For your
reference a list of the available channels and corresponding
frequencies is printed on page 10.
1. The transmit power of the
UH036SX is 500mW which will
provide a range of up to 3+ Km.
2. Before you transmit, listen for
activity on the selected channel.
3. When the channel is clear, press and hold the
transmit. TX
Hold the radio with microphone approximately 5 cm in
front of your mouth with the antenna at approximately 45°
angle away from your head. Speak in a clear, normal
conversational voice.
4. When you have finished speaking,
release the
PTT
the LCD. Listen for a response.
While receiving, the RX icon is displayed.
or to select the
appears on the LCD.
. TX then disappears on
5
PTT
Switch
to
PTT
TX