Turning The Answering System On/Off - Uniden WDECT 2355+2 Quick Start Manual

UP354BH(WDECT2355+2) OM 5/14/04
Answering System Default Settings
Some answering system functions can be set through the base or handset.
Default settings for each function are as follows:
Functions Default Setting
Answer On/Off On
Time SUN 12:00 AM*
Security Code 80
Ring Time 9 times
Record Time 1 minute
Message Alert Off
Call Screen On

TURNING THE ANSWERING SYSTEM ON/OFF

1) To turn the answering system on, press ans on/off when
the phone is in standby mode.
After the announcement "Answering System is on," the
current greeting message will be played and you will hear a
confirmation tone. The message counter displays the number
of messages stored in memory. If the display flashes, then
there are new messages waiting for you.
2) To turn the answering system off, press ans on/off. After the announcement
"Answering System is off," the message counter display will no longer be illuminated.
10:52 AM Page 43
Reference Page
Base Handset
P. 43 -
P. 46 P. 19 *To activate the clock and
P. 46 P. 17 time stamp, you must
P. 47 P. 18 setup the Time function.
P. 47 P. 18
P. 48 P. 18
P. 49 P. 18
[ 43 ]