Uniden WDECT 2355+2 Quick Start Manual page 55

UP354BH(WDECT2355+2) OM 5/14/04
Setting the call screen
You can screen calls when the Call Screen function is set to On.
1) Press clock/MENU six times.
The current Call Screen setting (On or Off) appears on the base.
2) Press skip/SELECT or
3) Press SET. A confirmation tone sounds, and the system announces the new setting.
Screening a call
From the base
To screen an incoming call, do the following steps as follows:
1) After the answering system answers, the base speaker will let you
hear the calls as the machine records the message. To adjust the
volume, press /vol/
To mute the call screen temporarily, press
the system is answering.
2) To answer the call, press
(when AutoTalk is set to On). If the handset is away from the base, press
speaker or any number key,
set to On).
The answering system will disconnect automatically.
From the handset
1) Press when the system is answering.
To mute the call screen temporarily, press
2) To answer the call, press
and the system return to standby mode.
10:52 AM Page 49
repeat/SELECT to choose or
or /vol/ .
play/stop when
or pick up the handset from the base
, or (when Any Key Answer is
when the system is answering.
, otherwise press to cancel the call screen
.
• If you set the call
screen to off, you
can not screen a call.
• If you press
screen will be
canceled and the
handset is put in
talk mode.
• If you press
another handset is
screening a call, you
,
will hear a beep and
you can not screen
a call.
, call
while
[ 49 ]