Uniden WDECT 2355+2 Quick Start Manual page 51

UP354BH(WDECT2355+2) OM 5/14/04
1) When the phone is in standby mode, press
scroll through ringer volumes. The ringer level is displayed, and you will hear each
volume level. The last ringer heard will be the volume setting, then the phone returns
to standby mode.
2) You can also set the base ringer volume while the phone is ringing by pressing the
/vol/ or /vol/
Adjusting the speaker volume level
When the base speaker is in use, press
the volume. Press /vol/
The number 1-10 appears on the base indicating the volume levels. 1 being the softest
and 10 being the loudest.
Answering System Settings
To set the following six functions you must enter the
menu mode.
• To scroll through the menu options, repeatedly
press clock/MENU on the base in standby mode.
The system returns to standby after the last menu
option. A confirmation tone sounds to indicate
standby mode.
• When you have completed the setting, press
play/stop to exit the menu mode, or
clock/MENU to move to the next menu option.
• You can also set these menus from the handset.
See "Answering System Setup" on page 17
for instructions.
10:52 AM Page 45
/vol/ or /vol/
.
/vol/ or /vol/
for louder or /vol/ for softer.
clock/MENU
clock/MENU
clock/MENU
clock/MENU
clock/MENU
clock/MENU
clock/MENU
repeatedly to
on the base to adjust
"Time"
"Security Code"
"Ring Time"
"Record Time"
For your convenience,
voice prompts will
"Message Alert"
guide you through
the menu setup
mode.
"Call Screening"
Return to Standby
[ 45 ]