Setting Up The Phone - Uniden TRU4060-2 Owner's Manual

Step 1Charging the Battery
INSTALL THE HANDSET BATTERY
Remove the cover.
Connect the battery
pack connector with
the correct polarity.
Replace the cover.
PLUG INTO AC POWER
Plug the AC adapter cord into the base unit and then to
a 120V AC outlet.
Place the handset in the base .
Note: You must charge the battery pack continuous
for 15-20 hours before using the phone.
Step 2 Connecting
CONNECT TO A PHONE LINE
When the handset battery pack is fully charged, plug the
telephone cord into the base unit and then into a telephone
wall jack.
Your phone is set for tone dialing. If your local network requires
pulse dialing, please see "Setting up the phone, Choose the
dialing mode" in your owner's manual.
Step 3 Setting up the Caller ID Options/Language
Note: Three Caller ID options are available:
Auto Talk, Caller ID on Call Waiting (CIDCW)
and Area Code.
Q U I C K R E F E R E N C E G U I D E
TO SELECT CALLER ID OPTIONS
Press menu/mute.
Press + or - to move the pointer to "
", then press select/ch.
Press + or - to move the pointer to an option, then
press select/ch.
Press + or - to change the option setting.
Press select/ch and return the handset
to the base.
TO CHOOSE THE LANGUAGE
Press menu/mute.
Press + or - to move the pointer to
" ", then press select/ch.
Press + or - to change the option setting.
Press select/ch and return the handset
to the base.
[ 5 ]