Uniden TRU4060-2 Owner's Manual page 30

[ 28 ] P H O N E B O O K
From Standby Mode
1) When the phone is in the standby mode, press pb/rocket/<.
2) Press + or - to view the phonebook locations (see "Viewing the
Phonebook" on page 27).
3) Press talk/flash. The displayed number is dialed.
From Talk Mode
1) Press talk/flash.
2) Press pb/rocket/<.
3) Press + or - to view the phonebook locations (see "Viewing the
Phonebook" on page 27).
4) Press select/ch. The number in the displayed phonebook location
is dialed.
If you select a speed dial memory location (10 locations: SPD1 – SPD0) when storing a phone
number in the phonebook dial location, you can use the speed dialing feature. When the
phone is in the standby mode, press and hold a number key (0-9) associated with the speed
dial, then press talk/flash. The phone number in the speed dial (SPD1 – SPD0) is dialed.