Chain Dialing; Editing A Stored Name And/Or Phone Number - Uniden TRU3466 Owner's Manual

Chain Dialing

The memory locations on the handset and the base are not limited to phone
numbers. You may want to store in memory a group of numbers (up to 20 digits)
that you need to enter once your call connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Once you have called your bank,
when you are prompted to enter the account number, simply press memory and
then the location where the special number has been stored.
Store your special number with identifying name in memor y as you would a phone
number. (Refer to "Storing a Phone Number and Name" on page 26.) Enter a pause
as necessar y in the sequence.
A pause counts as one digit and represents a two second delay in time between
digits as they are sent.

Editing a Stored Name and/or Phone Number

1) Press and hold memory until
" " is displayed.
2) Press L/up/intcm and M/down/conf.
or enter a number ( 0 0 1 1 - 3 3 0 0 ) to select the memor y location
you would like to edit.
3) Press select/channel.
The following screen appears with
the memor y location number that
you have selected in the display.
M E M O R Y F E A T U R E S
[ 31 ]