Entering Your Area Code - Uniden TRU3466 Owner's Manual

note
If your calling area
requires 10-digit dialing,
do not program this
option.
[ 12 ] [ 12 ] G E T T I N G S T A R T E D

Entering Your Area Code

If you enter your 3-digit area code number in the "
local area code does not appear in the Caller ID messages. Do not program this
option, if your calling area requires 10-digit dialing. When reviewing Caller ID
messages, you will see only the local seven digit number. For calls received from
outside your local area code, you will see a full 10-digit number.
When the area code has already been stored in memory, the stored area code will be displayed.
To change it, use the delete/volume and number keypad to enter
note
the new area code. Then press select/channel. To complete the
setting, press cid/hold or return the handset to the base unit.
1) When the phone is in the standby mode,
press and hold cid/hold until the Caller
ID setting screen appears.
2) Press / /tone or # /
t t
*
3) Press L/up/intcm to select
" " .
4) Press select/channel.
5) Use the dial buttons (0 to 9 ) to
enter the 3-digit area code.
6) Press select/channel. A tone sounds and the displayed area
code is entered.
7) Press cid/hold to complete the setting. Or return the handset
to the base unit. The handset returns to standby mode.
" option, your
to select " " or "
s
" .