Uniden TRU 8860 Series Owner's Manual page 61

Symptom
Severe noise interference.
The Caller ID does not display.
You cannot register the handset
at the base.
The handset doesn't
communicate with other
handsets.
The handset can't join the
conversation
Room Monitor feature does not
work.
If you still have a problem.
w w w . u n i d e n . c o m
• Keep the handset away from microwave ovens, computers, remote control toys, wireless
microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical
appliances.
• Move to another location or turn off the source of interference.
• The handset was picked up before the second ring.
• The call was placed through a switchboard.
• Call your local telephone company to verify your Caller ID service is current. There can be a
problem with your Caller ID service.
• Charge the battery pack for 15-20 hours.
• De-register the handset (see "De-register the Handset" on page 28) and register the handset
(see "Register the Handset" on page 15).
• De-register the handset (see "De-register the Handset" on page 28) and register the handset
(see "Register the Handset" on page 15).
• Make sure that you have registered all handsets.
• Make sure there are not 2 handsets already using the 3-way conference feature.
• Make sure that another handset is not in privacy mode.
• Make sure to place the handset(s) within the range of the base.
• Call our customer hotline at 1-800-297-1023.
Suggestion
T R O U B L E S H O O T I N G [ 5 9 ]