Uniden TRU 8860 Series Owner's Manual page 51

Talk mode
1) When the phone is in talk mode, select the Caller ID message you want to dial
(see "Viewing the Caller ID List" on page 46).
2) Press the soft key, and the number will be dialed.
DIAL
Storing Caller ID messages in the Phonebook
Messages shown in the Caller ID list can be stored in the phonebook. The phone
number and name of the party on the Caller ID list can be stored in memory.
1) When the phone is in standby mode, select the Caller ID message to be stored.
Then press the
STORE
is already stored in memory, you will hear a beep and
appears. The number will not be stored.
sto red !!
2) To complete the setting, follow the steps 3-8 in "Phonebook (Storing Phone
Numbers, Names, Distinctive Rings, and Speed dial)" on page 37.
w w w . u n i d e n . c o m
soft key.
Sto re/ Edi t Na me
appears. If the Caller ID message
T his da ta is alr ead y
note
•When a long distance call
1
has been set, " " appears
in the display.
•If the Caller ID message
was received as a private/
unknown number, or the
message does not have
the number, you cannot
store the message in the
Phonebook. If it was
received as private/
unknown name, the
message will be stored as
<No Name>.
•Even if the 100 memory
locations are full, the
message will be stored in
the Phonebook. However,
the message will be erased
from the Caller ID list.
C A L L E R I D [ 4 9 ]