Table of Contents
Advertisement
• The tone feature only
applies when the dial
mode is set to pulse.
• This special number
can be stored in a
memory location.
This is referred to
as Chain Dialing
(see page 26.)
[ 20 ]
B A S I C S
Redial
The redial/p key redials the last number dialed. The redialed number can be up to
32 digits long.
Tone Dialing Switch-over
Some telephone companies use equipment that requires
pulse dialing (sometimes referred to as rotary dialing).
If you need to enter tone dialing digits, you can switch-
over to tone dialing during the call. For example, entering
your bank account number after you have called your bank.
Initially make your call with the pulse dialing mode. Once your call connects, press
the
/tone/
key. Enter the desired number. These digits will be sent as tone
*
dialing. Once the call ends, the tone mode is canceled and pulse dialing mode
resumes.
Traveling Out-of-Range
During a call, as you begin to move your handset too far from your base unit, noise
increases. If you pass the range limits of the base unit, your call will terminate
within 1 minute.
www.uniden.com
Advertisement
Table of Contents
