Uniden EXT3165 Owner's Manual page 17

1) When the phone is in the standby mode, press and hold
cid/menu. The following screen appears.
2) Press the vol/ring/
3) Press select to toggle between ¨
each setting.
4) Press end or return the handset to the base unit to complete the setting.
The handset returns to the standby mode.
• If you are not sure of your dialing system, set for tone dialing. Make a trial call.
If the call connects, leave the setting as is, otherwise set for pulse dialing.
• If your phone system requires pulse dialing and you need to send the DTMF tones for
certain situations during a call, you may "switch-over" to tone dialing. (Refer to
"Tone Dialing Switch-over" on page 20.)
Setting the language
1) When the phone is in the standby mode, press and hold
cid/menu. The following screen appears.
2) Press the vol/ring/
3) Press select to toggle between ¨
(French) for each setting.
4) Press end or return the handset to the base unit to complete the setting.
The handset returns to the standby mode.
www.uniden.com
key three times to select ¨
¨ and ¨
key four times to select ¨
¨ (English) and ¨
¨.
¨ for
¨.
¨
G E T T I N G S T A R T E D [ 17 ]