1886
Note:
Fan style may vary.
Guide Line
7
Ceiling Bracket
Downrod
Installing the Canopy
Lift the canopy into place so that
the screw holes are aligned.
Installing the Blades:
Align blade with guide line in motor housing. Attach each blade to a blade iron using
the blade washer, found in the
found in the
hardware bag.
Repeat x6
Hanging Fan
Wiring
Insert the two canopy screws
found in the
hardware bag.
hardware bag, and the blade assembly screws,
Canopy
Blades
x2
Canopy Screw
bag
NOTICE
If screw holes do not align
properly then rotate the canopy
180 degrees. Hanger ball shape
must match canopy opening for
correct canopy installation.
x18
Blade Screw
bag
x6
Blade Washer
bag
Light
Remote
Troubleshooting