Chain Dialing; Selecting A Different Channel; Tone Dialing Switch-Over - Uniden EXT 1365 Owner's Manual

Chain Dialing

The memor y locations on the handset and base are not limited to phone
numbers, you may want to store in memor y a group of numbers (up to 16
digits) that you need to enter once your call connects. This is referred to as
Chain Dialing.

Selecting a Different Channel

If you encounter interference while using your phone, you can manually
change the phone´s channel for clear operation. Interference can come from
appliances or other phone in your home (see troubleshooting on page 52).

Tone Dialing Switch-over

Some telephone companies use equipment that require pulse dialing
(sometimes referred to as rotar y dialing). If you need to enter tone dialing
digits, you can switch-over to tone dialing during the call. An example of this
could be entering your bank account number af ter you have called your bank.
The digits of your bank account can be entered using DTMF tones.
Initially make your call with the pulse dialing mode. Once your call connects,
press . Enter the desired number (like in the example above, the bank
account number). These digits will be sent as tone dialing. This special
number can be stored in a memor y location. This is referred to as Chain
Dialing. Once the call ends, the tone mode is canceled and pulse dialing
resumes.
T E L E P H O N E F E A T U R E S [ 35 ]