Memory Dialing; Storing Phone Numbers And Names - Uniden EXI 386 Series Owner's Manual

Storing Phone Numbers and Names

Memory Dialing allows you to dial a number using just a few key presses. Your cord-
less telephone stores up to 10 names/numbers in the handset.
1) Press and hold mem until ¨
2) Enter a number (0 - 9) or press
memory location where you would like to store
the number.
3) Press select. The following screen appears, and a cursor
flashes indicating that the display is ready for the name to
be entered.
If this screen appears, the selected memory location is
already stored. Then you must either edit the entry in
this location, delete the entry in this location, or select
¨ ¨ to choose another location.
Go Back
4) To enter a name (up to 14 characters), use the number keys.
• See the "Steps for Entering Names and Special Characters". (See pages 23-24)
• Use #/ and * /tone/
• Use delete/ch to delete characters as needed.
• Press and hold delete/ch to delete all the characters.
• If a name is not required, go to step 5.
¨ is displayed.
Memory Store
or to select the
to move the cursor to the desired location.
Memory Store
1
2
Store Name
Edit Memory 1
Delete Memory 1
Go Back
M E M O R Y D I A L I N G
• In memory dialing
operation, you must
press a key within 30
seconds or the phone
will return to standby.
If you return the
handset to the base,
the phone will return
to standby also.
• You have 30 seconds
after pressing mem to
enter the number you
wish to store.
Otherwise, an error
tone will sound.
[ 21 ]