Headset Installation; Note On Power Sources; Maintenance - Uniden EXAI398 Series Owner's Manual

Headset Installation

Your phone may be used with an optional headset, the Uniden HS910. To use this feature, insert headset
plug into the headset jack. Your phone is ready for hands-free conversations.
(Headset may be purchased by calling the Uniden Parts Department or visiting the web site. See Quick
Reference Guide on page 3.)

Note on Power Sources

Battery replacement and handling
When the operating time becomes short, even after a battery is recharged, please replace the battery.
With normal usage, your battery should last about one year. Please contact your place of purchase or the Uniden Parts
Department for a replacement battery.
Warning: To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden battery
model and Uniden adapter model specifically designated for this product.
Power Failure
During the period that the power is off, you will
not be able to make or receive calls with the
telephone.

Maintenance

When the handset or base unit becomes slightly dirty
Wipe with a soft, dry cloth.
When the handset or base unit becomes very dirty
Wipe with a soft cloth that has been dampened with diluted, neutral detergent. Dry with a
dry cloth.
When the charging contacts become very dirty on both the handset and base unit
Using water only, dampen a cloth to clean the charging contacts. Then make sure to go
back over the charging contacts with a dry cloth before returning the handset to the base
unit to charge.
[ 44 ] A D D I T I O N A L I N F O R M A T I O N
• Use only the specified Uniden battery pack (BT-905).
• Do not remove the battery from the handset to charge it.
• Never throw the battery into a fire, disassemble it, or heat it.
• Do not remove or damage the battery casing.
Caution
Caution
Do not use paint thinner,
benzene, alcohol, or other
chemical products.
Doing so may discolor the
surface of the telephone
and damage the finish.
www.uniden.com