Installing.the.battery - Uniden DECT2085 Series Owner's Manual

Installing the Battery
Use.only.the.Uniden.BT-008.rechargeable.battery.pack.supplied.with.your.cordless.telephone.
Press in on the handset Press in on the handset
battery case cover. battery case cover.
Use the finger indention Use the finger indention
for a better grip and slide for a better grip and slide
the cover downward to the cover downward to
remove. remove.
Plug the battery cable into the Plug the battery cable into the
battery jack. Be sure to match the battery jack. Be sure to match the
red and black wires to the label red and black wires to the label
near the jack. The cable should near the jack. The cable should
snap into place. snap into place.
Gently pull on the battery cable. Gently pull on the battery cable.
If the battery connector comes If the battery connector comes
loose, try connecting again until loose, try connecting again until
the battery snaps into place. the battery snaps into place.
6
Replace the battery Replace the battery
case cover back on the case cover back on the
handset and slide it handset and slide it
upwards until it clicks upwards until it clicks
into place. into place.