Deleting.caller.id.numbers - Uniden DECT2085 Series Owner's Manual

• If.the.phone.number.is.a.local.or.non-toll.call,.but.the.Caller.ID.record.has.a."".in.front.of.the.number,.press..
*
[ /tone].to.delete.it.
Seven-Digit Dialing
If.you.can.make.a.local.call.by.dialing.only.seven.digits.instead.of.ten,.you.can.tell.the.phone.to.hide.your.local.area.
code.in.the.Caller.ID.list;.any.calls.from.outside.your.area.code.will.show.all.ten.digits..
To.program.your.local.area.code:
) Press.[Menu/Select]..Select.the.GLOBAL.SETUP.menu,.and.then.the.AREA.CODE.submenu.
2) Use.the.number.keypad.([0].through.[9]).to.enter.a.three-digit.area.code..If.an.area.code.has.already.been.
stored,.it.appears.in.the.display..Press.[Clear/Int'com].on.the.handset.or.[Clear/Mute].on.the.base.to.delete.the.
stored.code,.and.then.enter.a.new.one.
Press.[Menu/Select]. You will hear a confirmation tone. The setting applies to all registered handsets and the
3)
base.
Note:. If.you.have.multiple.bases,.select.the.base.before.programming.the.area.code.(see.page.25).
The phone uses the stored area code as a filter. When a call comes in, the phone compares the incoming area code
to.the.code.programmed.on.the.phone..If.the.two.codes.match,.the.station.hides.the.area.code.in.the.Caller.ID.list.
When.you.are.viewing.a.Caller.ID.record,.you.can.show.the.hidden.area.code.by.pressing.[#]..Press.[#].again.to.
hide.the.area.code..When.you.dial.from.a.Caller.ID.record.or.store.a.Caller.ID.record.in.the.phonebook,.the.phone.
dials.or.stores.the.digits.exactly.as.they.appear.on.the.display..If.you.need.to.use.ten.digits,.be.sure.to.press.[#].to.
show.the.area.code.before.you.dial.or.store.the.number..See.page.28.to.store.a.Caller.ID.record.in.the.phonebook.
Deleting Caller ID Numbers
To.delete.only.one.Caller.ID.number,.press.[
delete..Press.[Menu/Select] and select DELETE ENTRY. When the phone asks you to confirm, select YES.
To.delete.all.the.Caller.ID.numbers,.press.[
the phone asks you to confirm, select YES.
Notes:.•.When.you.delete.a.Caller.ID.number,.you.delete.it.permanently.
] when the phone is in standby, and then find the number you want to
].when.the.phone.is.in.standby,.and.then.press.[Menu/Select]..When.
36 36