Finding A Lost Handset; Using Hold, Conference And Transfer; Placing.a.call.on.hold; Conferencing - Uniden DECT2085 Series Owner's Manual

Finding a Lost Handset

To.locate.a.misplaced.handset,.press.[Int'com].on.the.base.when.the.phone.is.in.standby..Use.[
select.the.handset.you.want.to.page,.and.then.press.[Menu/Select]..Select.ALL.to.page.all.registered.handsets..
To.cancel.paging,.press.[Int'com].on.the.base.again.
Note:.. Handsets.that.are.not.currently.connected.to.this.base.will.not.be.paged.

Using Hold, Conference and Transfer

Placing a Call on Hold
) During.a.call,.press.[Clear/Int'com].on.the.handset.or.[Int'com].on.the.base.to.place.the.caller.on.hold..If.you.
leave.a.caller.on.hold.for.more.than.ten.seconds,.the.display.screen.will.read,.Line.On.Hold.
2) To.return.to.the.party.on.hold,.press.[ /Flash].or.[
to.the.holding.party.
Notes: • You can only place a caller on hold for five minutes. Once five minutes has passed, that party's line will be
disconnected.and.the.phone.will.return.to.standby.
. •.While.a.call.is.on.hold,.Caller.ID.and.Call.Waiting.cannot.be.received.

Conferencing

If.you.have.more.than.one.handset,.up.to.four.people.can.participate.in.a.conference.call..A.four-way.conference.call.
consists.of.an.outside.line,.two.handsets,.and.the.base.speakerphone..You.can.easily.join.a.call.already.in.progress..
The.handsets.must.be.currently.connected.to.the.same.base.(see.page.25).
) Press.[ /Flash].or.[
2) To.hang.up,.return.the.handset.to.the.cradle.or.press.[ ].on.the.handset.or.[
will.still.be.connected.to.the.call.
].on.the.handset.or.[ ].on.the.base.to.join.the.call.
].on.the.handset.or.[ ].on.the.base..The.phone.will.return.
40
].or.[ ].to.
].on.the.base..The.other.party.