Alesis MMT-8 Service Manual page 13

10/31/90 1.11
Alesis MMT-8 Service Manual 1.00
6) In step edit mode, changing the start time of a sysex event forward would cause a
lock up and often complete memory dump. This is now fixed.
1) If an empty part is selected, Edit mode should not be able to be entered. However,
if an empty part is played, it is possible to enter Edit mode, stop playing, and then
insert events which will corrupt data. Now, Edit mode cannot be selected when
playing an empty part.
2) If an empty part is recorded for 683 beats (either by recording through the entire
part, or rewinding with loop on to a beat before 683 and punching in) without having
set the length first, the length of the part will not be set properly, causing eroneous
data in the Edit mode as well as other problems. This is now fixed.
3) If a part's length is changed from the top, any notes whose duration was a multiple
of 256 clocks (2beats/64sub-beats, 5/32, 8/00, etc.) will have its duration altered such
that the duration becomes 256 clocks (2/64) greater than it was previously. This is
now fixed.
7