Find Handset
To locate the handset, press find handset on the base
when the base is in the standby mode. All registered
handset(s) beeps for 60 seconds, and "
on the handset display.
Paging is canceled when pressing any key on the handset
or find handset on the base. Additionally, if you receive
an outside/intercom call or intercom, page is canceled.
Flash and Call Waiting
If you have Call Waiting service and a call waiting tone
sounds while you are on a call, press talk/flash to
accept the waiting call. There is a short pause, then you
will hear the new caller. To return to the original caller,
press talk/flash again.
" appears
• If the handset
batteries are
completely drained,
the handset will not
beep when paging.
• You must subscribe
through your local
telephone company
to receive Call
Waiting Service.
B A S I C S
[ 31 ]