Redialing A Call - Uniden DCT5260 Owner's Manual

• If the number
exceeds 32 digits,
only the first 32
digits are retained
in redial memory.
• If the redial memory
is empty, you will
hear a beep.
• If you have not
pressed any key for
30 seconds, the
phone returns to the
standby mode.
• If you press the end
key, the operation
is canceled.
[ 28 ] B A S I C S

Redialing a Call

The last three phone numbers dialed can be
quickly redialed.
Redialing from Standby Mode
1) Press the CID RDL PB soft key in the standby mode.
L
2) Press volume/
", then press the OK soft key. The phone
number that was last dialed appears in the display.
L
3) Press volume/
three phone numbers dialed.
4) Press talk/flash or speaker.
The selected number is dialed.
5) To hang up, press the end key.
Redialing from Talk Mode
1) Press talk/flash or speaker, then press the MENU soft key.
2) Select the number you dialed by following steps 2-3 in "Redialing from Standby Mode".
To return to go back, press the BACK soft key.
3) Press the DIAL soft key.
4) To hang up, press the end key.
Deleting a Redial Record
1) In the standby mode, recall the desired number by
following steps 1-3 in "Redialing from Standby Mode".
2) Press the DELETE soft key.
L
3) Press volume/
4) Press the OK soft key. The redialed number is deleted.
M
or to select "
M
or to toggle through the last
M
or to choose " ".
or
or