Direct Walt Mounting - Uniden Cordless Telephone User Manual

Direct Wall Mounting
If you don't have a standard walt plate, you can mount your phone directly to the wall.
Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting location that
could cause a hazard when inserting screws into the walt.
• Try to mount your phone within 5-feet of a working phone jack to avoid excessive
wire lengths.
• Make sure the wall material is capable of supporting the weight of the base and
handset.
• Use #10 screws with a minimum length of 1-3/8 inches, with anchoring devices
suitable for the walt material where the base unit wilt be placed.
1) Insert two mounting screws into the walt, using the appropriate anchoring device,
3-15/16 inches apart. Allow about 1/8 inch between the wall and screw heads for
mounting the phone.
2) Refer to the steps on page 15 to complete the mounting process.
TOP
1/8 in.
_&l 5/16
_ l_n._.
IIIIIIIIIIIIIIII
in.
16