Figure 29. Separate the ToF cable from the ToF board
Go to
https://support.lenovo.com/partslookup
replacement parts:
ToF cable
ToF board
Remove the pogo pin with cable
Make sure the following FRUs (or CRUs) have been removed.
"Remove the LCD module" on page 26
"Remove the EDP cable" on page 28
"Remove the battery pack" on page 28
Step 1.
Disconnect the pogo pin cable from the system board.
Figure 30. Disconnect the pogo pin cable from the system board
Step 2.
Remove two screws and then remove the pogo pin with cable.
Figure 31. Remove two screws and remove the pogo pin with cable
38
Hardware Maintenance Manual
to look up the Lenovo part numbers of the following