Auxiliary Wi-Fi module
Remove the side switch module
Make sure the following FRU (or CRU) has been removed.
"Remove the LCD module" on page 26
Step 1.
Disconnect the side switch cable from the function board.
Figure 20. Disconnect the side switch cable from the function board
Step 2.
Remove two screws and then remove the side switch module.
Figure 21. Remove two screws and remove the side switch module
Screw specifications
M2 x L2
Go to
https://support.lenovo.com/partslookup
part:
Side switch module
Remove the USB board module
Make sure the following FRUs (or CRUs) have been removed.
"Remove the LCD module" on page 26
"Remove the EDP cable" on page 28
"Remove the battery pack" on page 28
Step 1.
Peel off the three pieces of tape.
34
Hardware Maintenance Manual
Number of screws
2
to look up the Lenovo part number of the following replacement