Table of Contents
Advertisement
)
Line up the red and black wires on
the battery pack with the label
inside the handset.
)
Push the battery pack connector
in until it clicks into place. Tug
gently on the wires to make sure
the battery pack is securely
connected.
Connect the charger
)
Connect a charger AC adapter to each
charger's
AC IN 8V
plug into the notch as shown. (These
adapters might already be connected.)
)
Plug the other end of the adapter into
a standard 0V AC power outlet.
)
Place each handset in a charger with the display facing forward. The
light should turn on.
CHArGE
If...
the
CHArGE
light doesn't
turn on
Charge all handsets completely (about 15 hours)
before using them.
Test the connection
Pick up each handset and press
the display should say Talk. (Press
If you can't get a dial tone or the handset display says Unavailable, try
moving the handset closer to the base or resetting it (see page 9).
)
jack and set the
Try...
-
reseating the handset.
-
checking the AC adapter connection.
-
seeing if the outlet is controlled by a wall
switch.
TaLk
Place the cover over the battery
compartment and slide it up into place.
. You should hear a dial tone, and
again to hang up.)
TaLk
Black
Black
Red
Red
Hide quick links:
Advertisement
Table of Contents
