Hide thumbs Also See for SCFF1842:

Advertisement

Quick Links

FROST-FREE FREEZER
Model: SCFF1842
User Manual
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS
Felix Storch, Inc.
Summit Appliance Division
An ISO 9001:2015 registered company
770 Garrison Avenue
Bronx, NY 10474
www.summitappliance.com

Advertisement

Table of Contents
loading

Summary of Contents for Summit SCFF1842

  • Page 1 FROST-FREE FREEZER Model: SCFF1842 User Manual BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS Felix Storch, Inc. Summit Appliance Division An ISO 9001:2015 registered company 770 Garrison Avenue Bronx, NY 10474 www.summitappliance.com...
  • Page 2: Table Of Contents

    TABLE OF CONTENTS Important Safeguards 3 – 4 Technical Information Installation Instructions 5 – 6 Before Using Your Freezer Installation of Your Freezer Reversing the Door Swing of the Freezer Operating Your Freezer 7 – 8 Control Panel “Fast Freeze” Function Defrosting Care and Maintenance Cleaning Your Freezer...
  • Page 3: Important Safeguards

    IMPORTANT SAFEGUARDS • Read all instructions before using the appliance. • Plug into a grounded 3-prong outlet. Do not remove grounding prong, do not use an adapter, and do not use an extension cord. • It is recommended that a separate circuit, serving only your appliance, be provided. Use receptacles that cannot be turned off by a switch or pull chain.
  • Page 4: Technical Information

    Replacing component parts and servicing shall be done by factory authorized service personnel so as to minimize the risk of possible ignition due to incorrect parts or improper service. – SAVE THESE INSTRUCTIONS – TECHNICAL INFORMATION Model SCFF1842 Type All-freezer Color Black...
  • Page 5: Installation Instructions

    INSTALLATION INSTRUCTIONS Before Using Your Freezer 1. Remove the exterior and interior packing. CAUTION: After unpacking you MUST allow this appliance to stand upright for at least 2 hours to allow the lubricant and refrigerant to drain back into the compressor and stabilize. Failure to do so may adversely affect performance and the lifetime of this unit.
  • Page 6: Reversing The Door Swing Of The Freezer

    Reversing the Door Swing of the Freezer This appliance has the capability of the door opening from either the left or right side. The unit is delivered to you with the door opening from the left side. Should you desire to reverse the opening direction, please follow the instructions below.
  • Page 7: Operating Your Freezer

    OPERATING YOUR FREEZER Reversing the Door Swing of the Freezer The freezer should be placed where the ambient temperature is between 61°F and 90°F (16°C to 32°C). If the ambient temperature is above or below this range, the performance of the unit may be affected.
  • Page 8: Defrosting

    Defrosting The freezer’s frost-free feature eliminates the need for manual defrosting. Defrosting takes place approximately every 14 hours (except when in the “Fast Freeze” mode); the defrost cycle lasts about 40 minutes. Melt water from the defrosting collects in a drip tray where it is evaporated. During the process of defrosting, the temperature display may be higher than the set temperature.
  • Page 9: Care And Maintenance

    CARE AND MAINTENANCE Cleaning your Freezer • Turn off the power, unplug the appliance, and remove all items including shelves and racks. • Wash the inside surfaces with a warm water and baking soda solution. Prepare the solution by mixing about 2 tablespoons of baking soda with a quart of water. •...
  • Page 10: Troubleshooting

    TROUBLESHOOTING You can solve many common freezer problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer. PROBLEM POSSIBLE CAUSE Not plugged in. Freezer does not operate.
  • Page 11: Notes

    NOTES...
  • Page 12: Limited Warranty

    LIMITED WARRANTY ONE-YEAR LIMITED WARRANTY Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is operated and maintained according to instructions attached to or furnished with the product, warrantor will pay for factory- specified parts and repair labor to correct defects in materials or workmanship.

Table of Contents