Summit SCFF-55 Instruction Manual

All-freezer
Hide thumbs Also See for SCFF-55:

Advertisement

FELIX STORCH, INC.
SUMMIT APPLIANCE DIVISION®
INSTRUCTION MANUAL FOR MODEL:
SCFF-55
ALL-FREEZER

Advertisement

Table of Contents
loading

Summary of Contents for Summit SCFF-55

  • Page 1 FELIX STORCH, INC. SUMMIT APPLIANCE DIVISION® INSTRUCTION MANUAL FOR MODEL: SCFF-55 ALL-FREEZER...
  • Page 2: We Care For The Environment

    *Before Putting Into UsE* Before connecting the appliance to the power supply, leave it standing for about 2 hours, this will reduce the possibility of malfunctions in the cooling system due to transport handling. Clean the appliance thoroughly; especially in the interior (See Cleaning and Maintenance).
  • Page 3: Disposing Of The Worn Out Appliance

    IMPORTANT If you bought this appliance to replace an old one equipped with a lock that cannot be opened from inside (lock, bolt), make sure that the lock is broken. This will make it impossible for children to lock themselves inside the appliance and suffocate.
  • Page 4: Placing And Installation

    PLACING AND INSTALLATION It is important to make sure the appliance is leveled evenly to prevent falling. Two spacers attached to the appliance must be fitted onto the upper edge of the condenser, thus preventing the appliance from being installed too close to the wall.
  • Page 5: Storing Fresh Foods

    Storing Fresh Foods Food to be stored in the freezer should be properly packed as to prevent mixing various moisture degrees and odors (in polyethylene bags or sheet, aluminum foil, wax paper, covered containers or bottles). Never store any inflammable, volatile or explosive substances.
  • Page 6: Cleaning The Appliance

    Self-defrosting There is no need to defrost the freezer, because this appliance is self-defrosting. Cleaning the Appliance Disconnect the power supply before cleaning the appliance. Do not use coarse or aggressive cleaning agents as you can damage the surface. Clean the exterior with water and a mild detergent. Varnished surfaces are cleaned with soft cloth and a non-abrasive cleaning agent (for example glass cleaners).
  • Page 7: Troubleshooting Guide

    Trouble-Shooting Guide During the service of your appliance, you can come across some trouble that in most cases result from improper handling of the appliance that can easily be eliminated. Appliance Fails to Operate After Connecting to the Power Supply: Check the supply in the outlet socket and make sure the appliance is switched on (thermostat in the operating position).
  • Page 8: Door Swing Reversal

    Door swing reversal Stainless steel models with towel bar handles do not have reversible doors.) If you find the direction of opening the door on your appliance inconvenient, you can change it. Holes on the opposite side have already been prepared at the factory 1.
  • Page 9: Before Calling For Service

    You may find the answer to your questions. If you don’t find the answer to your questions in this manual, find the unit model number (on the upper back of the refrigerator) and contact your Summit Appliance Dealer. Specifications are Subject to Change Without Notice.

Table of Contents