Liquid Damage; Registering Handsets - Uniden D1685 User Manual

D1685 series
Hide thumbs Also See for D1685:
Table of Contents

Advertisement

Installing a Line Filter or DSL Filter
A telephone line filter or DSL filter prevents services that use the phone line
from causing interference on your phone. To get a line filter, contact your
service provider or look in an electronics store.
Plug the filter into the telephone wall jack and plug the base into the filter.
Make a test call to make sure the noise is gone.

Liquid Damage

CAUTION: If the base is covered in liquid, disconnect the adapter &
phone cord from the wall before touching it.
If the liquid is only on the exterior housing of the base or handset, wipe it off
and use as normal. If you can hear liquid inside the housing:
1. Remove all compartment covers, and disconnect all cables and cords.
2. If liquid is leaking from any vent or hole, turn the phone so that the vent
faces down. If not, place the largest vent face down.
3. Let dry for at least 3 days. Check for liquid inside the phone before replacing
compartment covers & reconnecting cords.
Resetting Stations
Unplug the base to reset it. Plug it back in after at least a minute.
If you have trouble with a handset or if you want to replace one, reset it.
1. Press & hold
2. If you still have the base the handset is registered to, select
HS, then select the handset you want to reset. If you don't have that base
anymore, select
3. To confirm, select Yes. The handset displays

Registering Handsets

If you see
Not Registered
1. Place the handset in the base; the display should say Registering. If the
handset does not fit in the base, open the base menu and select
On the handset, press and hold
2. Wait until the display says
pick up the handset and press
#
If you don't hear a dial tone or the display says
charge the battery completely, then try again.
English - 20
# at the same time until you see the
and
End
Base
Unavailable.
on a handset, you must register it to a base before use.
Registration Complete
Talk/Flash
Handset not
until
Registering
#
(about 30 seconds), then
.
System Reset
Deregister
registered.
Register
displays.
Registration
Failed,
menu.
Accy.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents