Getting Your Messages; Screening Your Calls; Using The System While You're Away From Home - Uniden D1685 User Manual

To...
replay an earlier
message
skip a message
delete a
message
delete all
messages
play old
messages
stop playback

Screening Your Calls

You can use the answering system for call screening. While the system takes a
message, you can listen on the base speaker (if you turn on
a handset. Only one handset can screen calls at a time. If another handset tries
to screen calls, it beeps and returns to standby.
To...
hear the caller leaving a
message
answer the call
mute the call screen
without answering*
* If you mute the call screen, the system continues taking the message: it just stops
playing through the speaker.

Using the System While You're Away from Home

You can dial in to your answering system from any touch-tone phone. Before
you can use this feature, you must program a security code.
Programming a Security Code
With the phone in standby, open the menu; select
Security Code. Use the number keypad to enter a two-digit security code
99). Press
MEnu/sElEcT
#
Remember to make a note of your new security code!
Dialing In to Your System
1. Call your phone number & wait until the system answers. (If the system is
turned off, it answers after 10 rings & sounds a series of beeps.)
From the base
During the first 2 seconds of a message,
press PhonEbook.
Press cId .
dElETE
press .
With the phone in standby, press
dElETE ; press dElETE
After the system plays all new messages,
press PlaY/sToP again.
Press PlaY/sToP .
From the base
Listen to the caller over
the speaker.
Press sPEakEr
PlaY/sToP
Press
when you're finished.
While a message is playing,
again to confirm.
From a handset
Press
. Press
Press
.
handset to the cradle.
Ans.
From a handset
select 1:Repeat.
Select 3:Skip.
select 4:Delete.
Not available.
select 2:Play.
Select 5:Stop.
Call Screen) or from
MEssagE/MuTE .
Talk/Flash .
End or return the
Setup, then select
English - 17
(01 to